Product Data Sheet Show all documents

Davco® K10 Premium

Polyurethane-containing liquid applied membrane

Davco® K10 Premium is a liquid-applied polyurethane-containing elastomeric seamless waterproofing membrane. Moisture-cured characteristics ensures that further works can be carried out at a shorter time once the membrane has dried out.

  • Liquid applied.
  • No mixing
  • High solid content
  • Rapid curing
  • Flexible
  • Seamless application
  • UV Resistant
Product Data Sheet Show all documents

Usage

  • All types of roofs, balconies and decks
  • Waterproofing, repair and rust protections for gutters, troughs, parapet walls and flashings
  • Waterproofing of  external areas such as suspended structures
  • Sealing of joints
  • Lining faulty gutters and downpipes
  • Eliminates soldering of cracked non-ferrous roof valleys and flashings  

Advantages

  • Liquid applied.
  • No mixing
  • High solid content
  • Rapid curing
  • Flexible
  • Seamless application
  • UV Resistant

Packaging

4L pail

20L pail

Colour

Grey, White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Qualifies for LEED v4 and LEED v4.1 BETA projects globally
  • Tested in accordance with the relevant ISO 16000, EN 16516, CDPH 01350, and ASTM D2369 testing standards 
Product Information

Shelf Life

12 months in unopened containers.

Storage Conditions

Stored in a cool dry place.

Density

1.3±0.05
Technical Information

Shore A Hardness

64 - 65

Tensile Adhesion Strength

1.5 - 1.7 MPa

Crack Bridging Ability

Max 3.2mm (10cycles)

Application

Consumption

Consumption

Coating System

Primer: Davco® K10 Acrylic Primer

~0.3 to 0.5 Kg/M2

Base Coat: Davco® K10 Premium K10 Premium

1.4 Kg/M2 (Minimum for 2 Coats)

Reinforced System

Primer: Davco® K10 Acrylic Primer

~0.3 to 0.5 Kg/M2

Base Coat: Davco® K10 Premium K10 Premium

~1.4 Kg/M2 (Minimum for 2 Coats)

Reinforcing Mesh: Sikalastic® Fleece 

>80 gsm

Base Coat: Davco® K10 Premium K10 Premium~1.0 Kg/M2 

Please note that consumption/coverage is affected by substrate conditions (e.g. porosity, roughness)
Application steps

APPLICATION

  • Davco® K10 Premium should be applied directly from the pail.
  • Apply one coat Davco® K10 Premiumto the whole area and allow to cure, approx. 2-4 hours. (Temperature dependent)
  • Apply the 2nd coat of Davco® K10 Premium in a perpendicular direction to 1st coat.
  • All joints in floors should preferably be treated with additional coat of Davco® K10 Premium and appropriate joint solutions (e.g. Sikaflex®).
  • Davco® K10 Premium can be applied by brush or roller. A minimum of 2 coats is required, unless a trowel method of application is adopted.
  • Ponding test should be carried out at least 48 hours after the final application of Davco® K10 Premium.  

Documents