Product Data Sheet Show all documents

SikaTile®-480 Dustless Premium Tile Adhesive

Premium Performance C2TS1-type, cement-based tile adhesive for various applications.

SikaTile® 480 Dustless Premium is a premium performance, cement-based tile adhesive complies with PNS ISO 13007:2014 for C2TS1 classification. It is designed with superior and premium bond strength, anti-slip technology, and provides flexibility to accommodate substrate movement.

Premium High Bond Strength (≥ 1.2 MPa)
Provides Flexibility recommended for movement prone areas.
Anti Slip Technology for safer installation. Offers good workability.
Dustless Technology (dust control) for cleaner applications.
Water Resistance recommended for immersed areas, ideal for swimming pools, other wet areas.
Tile-on-Tile Application can be applied directly over existing tiles.
Easy to use; simply mix with water. Non-toxic, non-flammable.
Product Data Sheet Show all documents

Usage

SikaTile® 480 Dustless Premium formulated for both porous and non-porous tiles, including glass mosaics, glazed ceramics, granite, slate, and natural stone. Designed for interior and exterior applications, it delivers superior and premium adhesion for walls and floors.   SikaTile® 480 Dustless Premium is ideal for installing tiles on a wide range of substrates, including concrete, cement renders or screeds, blockwork, rendered brickwork, and mortar leveling layers. It is also suitable for smooth and even lightweight concrete blocks or for thick-bed applications to correct uneven surfaces.   SikaTile® 480 Dustless Premium tile adhesive is recommended for wet and fully immersed areas such as swimming pools. For optimal protection, always apply a compatible waterproofing system prior to tile installation.  

Advantages

Premium High Bond Strength (≥ 1.2 MPa)
Provides Flexibility recommended for movement prone areas.
Anti Slip Technology for safer installation. Offers good workability.
Dustless Technology (dust control) for cleaner applications.
Water Resistance recommended for immersed areas, ideal for swimming pools, other wet areas.
Tile-on-Tile Application can be applied directly over existing tiles.
Easy to use; simply mix with water. Non-toxic, non-flammable.

Packaging

25 kg per bag

Colour

Gray powder

Product Details

Product Information

Chemical Base

Cement, selected aggregates and additives

Shelf Life

12 months from date of production if stored properly

Storage Conditions

Store properly in unopened and undamaged original sealed containers protected from direct sunlight and moisture.
Technical Information

Mortar mix design

22% - 24% water-to-powder ratio

Tensile Adhesion Strength

Days       MPa       PSI
28           ≥ 1.2       ≥ 174
(product applied using 24% water-to-powder ratio)

Application

Application Information

Mixing Ratio

5.5 to 6 liters of water per 25 kg bag, until a lump free, creamy consistency is achieved.
Working Temperature: 10°C to 35°C.

Pot Life

1 – 2 hours

Open Time

20 minutes

Curing Time

24 hours

Fresh mortar density

1.5 – 1.8 kg/ L
Consumption

Consumption

6mm x 6mm notched trowel – approx. 3.5 kg per sqm.

10mm x 10mm notched trowel – approx. 5 kg per sqm.

*Disclaimer: Consumption may be higher depending on surface irregularities. Consult Sika Technical team for further application information
Application steps

APPLICATION INSTRUCTIONS

General Condition
All surfaces must be structurally sound, dry, clean, and free from oil, grease, wax, dust, and other contaminants. All surfaces should be dampened using a sponge or cloth immediately before application. Very porous surfaces should be properly primed to ensure adhesion.
 

Concrete Surfaces
Remove all release agents, especially on tilt-up slabs. New concrete must be cured for at least 28 days before application. Steel trowel finished concrete should be acid-etched or wire brushed prior to tiling.
 

Rendered Surfaces
Newly rendered surfaces must be cured for at least 7 days before application. Painted surfaces must be scrubbed or abraded to expose at least 75% clean surfaces.

MIXING

Add (1) 25kg bag of SikaTile® 480 Dustless Premium Tile Adhesive to approximately 5.5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

 

APPLICATION

Prepare the adhesive as instructed. Allow the mix to stand for 1 to 2 minutes, then remix before use. Spread adhesive onto the substrate using: 6mm x 6mm notched trowel for wall tiling. 10mm x 10mm notched trowel for floor tiling. Trowel size depends on tile size, depth of knobs, grooves, or ridges on tile back, substrate evenness.

For tiles with deep grooves or ridges (e.g., slate or lugged tiles), butter coat adhesive on the back of the tile in addition to notched trowel application. Thicker adhesive beds help compensate for uneven substrates, especially slates.Do not spread more than 1 sqm of adhesive at a time.

Ensure adhesive remains wet when tiles are laid and tapped into position for full contact. Ensure no voids under tiles. Do not allow adhesive to skin over before tiling. Install tiles within the open time specified. Do not disturb or walk on tiles for 24 hours after installation. Grouting should preferably be carried out at least 24 hours after the completion of tiling. For best results use SikaTile® Grout.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened or cured materials can be only mechanically removed.

Documents