Product Data Sheet Safety Data Sheet Show all documents

SikaProof® Membrane (paste)

1-Part Bitumen Polymer-Modified Liquid Applied Membrane

Sikaproof membrane is a 1- component,water based, bitumen polymer modified waterproofing,cold applied liquid membrane.

  • Single component, ready to use
  • Easily applied by roller or brush
  • Fast curing to a durable, flexible consistency
  • Excellent adhesive and elongation properties
  • Designed for use on new and existing structures
  • Contains no solvent
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Below grade waterproofing of concrete and masonry surfaces
  • Flat roofs
  • Balconies
  • Basements,etc.
 

Advantages

  • Single component, ready to use
  • Easily applied by roller or brush
  • Fast curing to a durable, flexible consistency
  • Excellent adhesive and elongation properties
  • Designed for use on new and existing structures
  • Contains no solvent

Packaging

18 Kg Pail

Product Details

Product Information

Shelf Life

Minimum 12 months if stored properly in unopened, original containers

Storage Conditions

Keep dry at 5 °C -35 °C in a cool, shaded place

Density

1.1kg/liter

Solid content by weight

55% - 63%
System information

System Structure

System

System Build-up

Coating System
  1. Primer (SikaProof® Membrane diluted in 20% to 50% water)
  2. 2 Coats of SikaProof® Membrane
    ​​​

Reinforced System
  1. Primer (SikaProof® Membrane diluted in 20% to 50% water)
  2. 1 Coat of SikaProof® Membrane
  3. Sikalastic Fleece
  4. 1 Coat of SikaProof® Membrane
  5. 2 Coats of SikaProof® Membrane 
Technical Information

Shore A Hardness

20 - 25

Tensile Strength

 1N/mm2

Thermal Resistance

Passes @ 4 °C (Low Temperature Flexibility ASTM D-430)

Application

Application Information

Curing Time

At least 48 Hours after top coat for curing

Drying Time

4 Hours until Dry
(0.60mm Thickness, 30 °C, 80% Relative Humidity)
Consumption

Consumption

  • Primer  : 0.2 - 0.3 Kg/M2
  • Coats   : 0.6 Kg/M2 per Coat (2.0 Kg/M2 for 1.1 mm Dry Film Thickness (DFT) )
Application steps

EQUIPMENT

  • Brush or Roller for application

SUBSTRATE PREPARATION

  • Substrate must be clean , sound, dry and free from any surface contamination i.e. grease, curing compounds, oil and surface laitance.

CLEANING OF TOOLS

Clean tools and hands with cold water when wet. Dried material must be removed mechanically.

    Documents