Product Data Sheet Show all documents
Sika® ViscoCrete®-3000 P7

Sika® ViscoCrete®-3000 P7

Powered by Viscocrete® High-efficient superplasticizer

Sika® ViscoCrete®-3000 P7 is the latest development superplasticizer for concrete. It meets the requirements for high range water reducing
superplasticizers according to ASTM C494 Type G.

Sika® ViscoCrete®-3000 P7 gives the following advantages:
  • Strong water reduction, resulting in high density, high strength and reduced permeability
  •  Less sensitive against variations in aggregates and / or different cement types
  •  High efficiency even at low dosage rates
  •  Extended workability in conjunction with subsequent strength development
  • Superior plasticizing effect, resulting in improved flow, placing and compaction characteristics
  •  Reduced shrinkage during curing and reduced creep when hardened
  •  Provides many opportunities for cost improvement e.g.:
    •  Cement replacement/reduction,
    •  More economic mix design
It is suitable for use in reinforced and prestressed concrete structures.
Product Data Sheet Show all documents

Usage

Sika® ViscoCrete®-3000 P7 is a unique multipurpose superplasticizer that is particularly suitable for the production of ready-mix concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost/performance Sika® ViscoCrete®-3000 P7 is used for the following:
  •  A wide range of applications where excellent workability is requested
  •  Concrete with high water reduction requirement
  •  High efficient concrete applications
  •  Variable use in different concrete systems with different raw materials
 

Advantages

Sika® ViscoCrete®-3000 P7 gives the following advantages:
  • Strong water reduction, resulting in high density, high strength and reduced permeability
  •  Less sensitive against variations in aggregates and / or different cement types
  •  High efficiency even at low dosage rates
  •  Extended workability in conjunction with subsequent strength development
  • Superior plasticizing effect, resulting in improved flow, placing and compaction characteristics
  •  Reduced shrinkage during curing and reduced creep when hardened
  •  Provides many opportunities for cost improvement e.g.:
    •  Cement replacement/reduction,
    •  More economic mix design
It is suitable for use in reinforced and prestressed concrete structures.

Packaging

210 Liter Drum, 1000 Liter Bulk

Colour

White turbid liquid

Product Details

Product Information

Chemical Base

Polycarboxylate ether

Shelf Life

12 months from date of production if stored in unopened and unchanged original sealed containers

Storage Conditions

Store properly in unopened and undamaged original sealed containers protected from direct sunlight & moisture at temperatures between +5°C and +30°C.

Specific gravity

~ 1.030 - 1.070

Application

Application Information

DISPENSING

Sika® ViscoCrete®-3000 P7 is added to the gauging water or added with it into the concrete mixer.


To take advantage of the high water reduction, a wet mixing time, which is depending on the mixing conditions and mixer performance, of at least 60 seconds is recommended.


To avoid excess water in the concrete, the final dosage must begin only after 2/3 of the wet mixing time.
Consumption

Recommended Dosage

0.8% - 2.0% by weight of total cementitious binder
Application steps

APPLICATION INSTRUCTIONS

The standard rules of good concreting practice, concerning production and placing, are to be followed.

Laboratory trials shall be carried out before concreting on site, especially when using a new mix design or producing new concrete components.


Fresh concrete must be cured properly and curing applied as early as possible.

Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be removed mechanically.

Documents