Product Data Sheet Safety Data Sheet Show all documents
Sika® ViscoCrete®-900 NT

Sika® ViscoCrete®-900 NT

3rd Generation Low-Mid Range Superplasticizer

Sika® ViscoCrete®-900 NT is a third generation low-mid range superplasticizer for concrete and mortar. It meets the requirements for superplasticizers according to ASTM C494 type G.

Sika® ViscoCrete®-900 NT acts by different mechanisms. Through surfaceabsorption and sterical separation effect on the cement particles, in parallel to
the hydration process, the following properties are obtained:
  • High water reduction (resulting in high density and strengths)
  • Excellent flowability (resulting highly reduced placing and compacting efforts)
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sika® ViscoCrete®-900 NT is suitable for the production of site mixed as well as ready-mix concrete. Sika® ViscoCrete®-900 NT is used for concrete with extended transportation or placing time. Sika® ViscoCrete®-900 NT facilitates good water reduction, excellent flow properties optimal cohesion and highest self compaction behaviour.
Sika® ViscoCrete®-900 NT is used for the following types of concrete:
  • Hot weather concrete and concrete with extended transportation or placing time
  • Concrete with highest water reduction (10-15% typical)
  • High strength concrete
  • Grade 30-40 mpa low medium-high workability concrete, 125 mm -180 mm slump
High water reduction and excellent flowability have a positive influence on the above mentioned applications.  

Advantages

Sika® ViscoCrete®-900 NT acts by different mechanisms. Through surfaceabsorption and sterical separation effect on the cement particles, in parallel to
the hydration process, the following properties are obtained:
  • High water reduction (resulting in high density and strengths)
  • Excellent flowability (resulting highly reduced placing and compacting efforts)

Packaging

210 L/drum, 1000 L/bulk

Product Details

Product Information

Chemical Base

Polycarboxylic polyether type polymer

Shelf Life

12 months from date of production if stored properly in unopened,

undamaged, original container.

Storage Conditions

Protect from direct sunlight at temperatures between +5oC and +35oC

Density

1.09 kg/L typical

Application

Application Information

DISPENSING

With the use of Sika® ViscoCrete®-900 NT concrete of highest quality is being produced. The standard rules of good concreting practice (production as well as
placing) must also be observed with Sika® ViscoCrete®-900 NT concrete.

Fresh concrete must be cured properly.
Consumption

Recommended Dosage

For plastic concrete:                                                  1.0-1.5% by weight of

                                                                                      cement binder
Application steps

APPLICATION INSTRUCTIONS

Sika® ViscoCrete®-900 NT is added to the gauging water or simultaneously poured into the concrete mixer. For optimum utilization of the high water reduction we recommend thorough mixing at a minimal wet mixing of 60 seconds. The addition of the remaining gauging water – to fine tune concrete consistency - may only be started after 2/3 of the wet mixing time, to avoid surplus water in the concrete.

Documents